Flashing an Realme 13 Pro 5G RMX3990 involves the process of reinstalling or updating the device’s firmware, which can help resolve issues such as software bugs, system crashes, or performance degradation. Flashing is typically carried out through official software provided by Realme or using third-party tools, depending on whether you are restoring the stock firmware or trying to install a custom ROM. While flashing can provide solutions for various problems, it also comes with its set of challenges and risks. In this paragraph, we will discuss the Realme 13 Pro 5G RMX3990 flashing process and explore some of the common issues and potential problems that users may encounter during this procedure.
Flashing Process of Realme 13 Pro 5G RMX3990
The flashing process for the Realme 13 Pro 5G RMX3990 can be done through different methods, but the most common and recommended approach is to use official tools and software from Oppo to ensure the integrity and security of the device. Flashing via the official method typically involves downloading the correct firmware version for your specific model from Realme’s website or from the device’s support page in the settings. Here are the general steps to flash the Realme 13 Pro 5G RMX3990
Flashing Process Using MSM Tool
- Prepare the Device: First, power off your Realme 13 Pro 5G RMX3990 Then, boot the phone into EDL (Emergency Download Mode), which is a mode used by Qualcomm devices to facilitate flashing. To do this, connect the phone to the computer while holding the appropriate key combination (usually Volume Up + Power) to enter EDL mode.
- Run the MSM Tool: After successfully entering EDL mode, launch the MSM Tool on your PC. It should detect your device, and you will see the option to begin flashing. Make sure that you select the correct firmware for the Realme 13 Pro 5G RMX3990 This is crucial, as using incorrect firmware can lead to boot loops or other issues.
- Start the Flashing Process: Once you’ve confirmed the correct firmware, click the “Start” button within the MSM Tool to begin the flashing process. The tool will then proceed to flash the official firmware onto the device. This process may take several minutes, and during this time, it is essential not to disconnect the phone or interrupt the process, as this could cause serious damage to the system.
- Completion: After the flashing process is complete, the MSM Tool will notify you. The Realme 13 Pro 5G RMX3990 should now automatically reboot, and once the system finishes booting, you will be greeted with the fresh installation of OxygenOS or the factory firmware.
Drivers / Tools
OplusFlashTool_android 15_for_Sales: Download
password: 123
Oppo_Latest_MTK_QCOM_Driver_Setup_V2.0.1.1: Download
Realme 13 Pro 5G RMX3990 Flash File Latest
Next, install the necessary drivers for your Realme 13 Pro 5G RMX3990 Flash File Latest on the PC. Qualcomm USB drivers are required for proper communication between the phone and the computer during the flashing process. Also, ensure your phone’s battery is sufficiently charged (at least 50%) to avoid interruptions during the flash.
RMX3990export_11_14.1.0.630EX01_2024102214550000
Phone Name = Realme 13 Pro 5G
Project No = 24682
