Flashing the OnePlus 13R 5g (CPH2647) using the MSM Tool can be a highly effective way to restore or update the device, fix system issues, or even recover a bricked device. The MSM (Mobile Station Modem) Tool is a powerful utility designed for Qualcomm devices, and it is particularly useful for OnePlus smartphones. The process involves flashing the firmware on the device, ensuring that the operating system is correctly installed and that any issues preventing the phone from booting properly are resolved. Below is a detailed guide to understanding the flashing process and how to perform it safely.
MSM Tool Flashing for OnePlus 13R 5g (CPH2647)
The MSM Tool is essentially a piece of software that enables users to flash official firmware onto Qualcomm-powered devices, like the OnePlus 13R 5G. This tool is often used in cases where devices are bricked (unable to start up) or encountering system errors that cannot be resolved through typical recovery methods. It’s important to note that flashing should be done carefully, as incorrect flashing can lead to device damage or loss of data.
When flashing a OnePlus 13R 5G using the MSM Tool, the goal is to either restore the device to its factory state or update its firmware to the latest available version. The process typically involves connecting the device to a computer, entering a specific boot mode, and then using the MSM Tool to apply the firmware package. Before flashing, it is crucial to back up any important data from the device, as the flashing process often wipes the phone’s internal storage.
Requirements for Flashing OnePlus 13R 5G with MSM Tool
Before beginning the flashing process, there are several key requirements to ensure a smooth and successful operation. First, you’ll need a Windows PC, as the MSM Tool is primarily designed for Windows environments. Additionally, you’ll need to download the MSM Tool for OnePlus 13R 5G (CPH2647) from a reliable source. Ensure that you also have the official firmware (OxygenOS) package compatible with your device model.
Next, install the necessary drivers for your OnePlus 13R 5G on the PC. Qualcomm USB drivers are required for proper communication between the phone and the computer during the flashing process. Also, ensure your phone’s battery is sufficiently charged (at least 50%) to avoid interruptions during the flash.
Flashing Process Using MSM Tool
- Prepare the Device: First, power off your OnePlus 13R 5G. Then, boot the phone into EDL (Emergency Download Mode), which is a mode used by Qualcomm devices to facilitate flashing. To do this, connect the phone to the computer while holding the appropriate key combination (usually Volume Up + Power) to enter EDL mode.
- Run the MSM Tool: After successfully entering EDL mode, launch the MSM Tool on your PC. It should detect your device, and you will see the option to begin flashing. Make sure that you select the correct firmware for the OnePlus 13R 5G (CPH2647). This is crucial, as using incorrect firmware can lead to boot loops or other issues.
- Start the Flashing Process: Once you’ve confirmed the correct firmware, click the “Start” button within the MSM Tool to begin the flashing process. The tool will then proceed to flash the official firmware onto the device. This process may take several minutes, and during this time, it is essential not to disconnect the phone or interrupt the process, as this could cause serious damage to the system.
- Completion: After the flashing process is complete, the MSM Tool will notify you. The OnePlus 13R 5G should now automatically reboot, and once the system finishes booting, you will be greeted with the fresh installation of OxygenOS or the factory firmware.
Post-Flash Steps
After successfully flashing the firmware, it is important to perform a few additional steps. First, check the device to ensure that it is functioning correctly, and verify that no issues remain. You may also want to restore your previously backed-up data. If the device was bricked before flashing, check if all functionality has been restored. Additionally, you may need to log in to your Google account or reconfigure certain system settings..
Flash file
OplusFlashTool_v5.6.44_for_Sales: Download
password: 123
Oppo_Latest_MTK_QCOM_Driver_Setup_V2.0.1.1: Download
OnePlus 13R 5g CPH2647 Flash File Latest
Next, install the necessary drivers for your OnePlus 13R 5g on the PC. Qualcomm USB drivers are required for proper communication between the phone and the computer during the flashing process. Also, ensure your phone’s battery is sufficiently charged (at least 50%) to avoid interruptions during the flash.
Conclusion
Flashing theOnePlus 13R 5g using the MSM Tool is an excellent method for users to fix a wide range of issues, including system crashes, boot loops, or complete bricking of the device. However, it is essential to follow the procedure carefully, as any mistakes can potentially harm the device. By ensuring that the correct firmware is used and the proper steps are followed, the process can result in a restored or upgraded device that runs optimally.
