How to Fix OnePlus Nord CE 3 Lite 5G (CPH2465) Stuck on Flashing Unlock Logo

If your OnePlus Nord CE 3 Lite 5G (model CPH2465) is stuck on a flashing unlock logo or caught in a bootloop after attempting to unlock the bootloader or flash custom firmware, don’t panic. This guide will walk you through the steps to unbrick your device and restore it to working condition.

---

🔍 Understanding the Issue

When the device displays a flashing unlock logo and fails to boot, it’s often due to:

• Incomplete or failed bootloader unlock attempts
• Corrupted firmware or custom ROM installations
• Interrupted flashing processes
• Loss of access to Fastboot or Recovery modes

In such cases, the device may be soft-bricked, requiring a firmware reinstallation to recover.

---

🛠️ Step-by-Step Recovery Guide

1. Attempt to Access Fastboot Mode

Even if the device seems unresponsive, try the following:

• Method 1: Press and hold the Power + Volume Up buttons simultaneously for about 10 seconds. This may boot the device into Fastboot mode.
• Method 2: If the above doesn’t work, connect the device to a PC and use the command: adb reboot bootloader Note: Ensure USB debugging was previously enabled.

If successful, you’ll see the Fastboot interface, allowing further recovery steps.

2. Download the Official Stock ROM

Obtain the official firmware for the OnePlus Nord CE 3 Lite 5G (CPH2465):

• Source: gsmxr.com
• Firmware Version: OxygenOS 13 based on Android 13
• Includes: MSM Download Tool, necessary drivers, and flashing instructions

Ensure you download the correct version matching your device’s region and variant.

3. Install Necessary Drivers

Before flashing, install the required USB drivers:

• Qualcomm USB Drivers: Essential for EDL (Emergency Download) mode
• OnePlus Drivers: For proper device recognition

Driver installation guides are typically included in the firmware package.

4. Enter EDL Mode

If Fastboot mode is inaccessible:

• Method: Power off the device. Then, press and hold Volume Up + Volume Down buttons simultaneously and connect the device to the PC via USB. The screen may remain black, but the PC should detect the device in EDL mode.

Note: EDL mode is a low-level recovery mode used for unbricking.

5. Flash the Firmware Using MSM Download Tool

Proceed with caution:

1. Launch MSM Download Tool on your PC.
2. Load the Firmware: Click on the appropriate firmware file within the tool.
3. Connect Device: Ensure the device is in EDL mode and connected via USB.
4. Start Flashing: Click on “Start” to begin the flashing process.
5. Wait: The process may take several minutes. Do not disconnect the device.

Upon completion, the device should reboot into the system.

---

⚠️ Important Considerations

• Data Loss: This process will erase all data on the device.
• Battery Charge: Ensure the device has at least 50% battery before proceeding.
• Warranty: Unlocking the bootloader and flashing firmware may void the warranty.
• Risk: Improper flashing can permanently damage the device. Proceed at your own risk.

---

📺 Visual Aid

For a visual walkthrough, refer to the following video tutorial:

Unbrick OnePlus Nord CE 3 Lite CPH2465 Stuck Boot Loop

---

🆘 Seeking Professional Help

If the above steps seem daunting or if the device remains unresponsive:

• Professional Services: Consider services like NCUnlock that specialize in unbricking OnePlus devices.
• Community Forums: Engage with communities on XDA Developers or the OnePlus Community for additional support.

---

By following these steps carefully, you can restore your OnePlus Nord CE 3 Lite 5G to a functional state. Always ensure to follow instructions meticulously and seek professional assistance if unsure..