Download the tested Mi 10 (Umi) Mi Account and FRP unlock file. 100% working anti-relock solution for Snapdragon 865. Secure EDL 9008 bypass for HyperOS and MIUI. Get professional repair tools at gsmxr. Mi Account activation lock or Google FRP verification for the Mi 10i (Umi), this guide is for you. While the Mi 10 (Standard) uses the codename Umi, the Mi 10 is officially codenamed CMI.
Using the wrong file for these devices can lead to a bricked motherboard, so ensuring you have the correct CMI firmware is critical for a successful repair.
Device Specifications & Compatibility
Device Name: Xiaomi Mi 10 (Umi)
Codename: CMI (Ensure your device is the ‘Pro’ model)
CPU: Qualcomm Snapdragon 865 (SM8250)
Security Level: Updated for 2026 patches (MIUI 14 / HyperOS)
Repair Type: Mi Account Remove, Anti-Relock, FRP Bypass
Essential Preparation
Hardware Tool: You will need to remove the back glass to access the EDL (9008) Test Points.
Drivers: Install the latest Qualcomm HS-USB QDLoader 9008 drivers on your PC.
Software Tool: This file is compatible with UnlockTool, UMT (Ultimate Multi Tool), Hydra, and GRT OTP Tool.
Cable: Use a high-quality Type-C data cable to prevent connection drops during flashing.
How to Connect Mi 10 (Umi) to EDL Mode
The Snapdragon 865 chipset requires the device to be in Emergency Download Mode (9008) for low-level flashing.
Locate the Test Points on the motherboard (usually two small gold dots near the battery connector).
Short the two points using tweezers and connect the USB cable to the PC.
Check Device Manager; the device should appear as Qualcomm HS-USB QDLoader 9008.
Flashing Procedure (Step-by-Step)
Step 1: Load the CMI Unlock File
Download the Mi 10 (Umi) Mi Account Remove File from the link below. Extract the package and locate the prog_firehose_ddr.elf (or .mbn) file.
Step 2: Tool Configuration
Open your service tool (e.g., UnlockTool). Select the Xiaomi tab and find Mi 10 (Umi) If the tool asks for a manual loader, point it to the firehose file you just extracted.
Step 3: Execute Reset
Click Reset Mi Account / Disable Cloud.
Once finished, click Erase FRP to remove the Google Account lock.
The process should take approximately 45–90 seconds.
Step 4: Anti-Relock Steps
After the phone reboots, do not connect to the internet immediately. Go to Settings and disable “Find Device.” If you use our specialized anti-relock file, the Mi Cloud services will be patched to prevent the phone from locking again when it detects a Wi-Fi signal.
