If you’re trying to bypass or unlock the FRP (Factory Reset Protection) on a Mi Pad 4 (Clover), it is important to note that FRP is a security feature used by Android devices to prevent unauthorized access after a factory reset. It’s linked to the Google account that was previously used on the device.
However, bypassing FRP can be tricky and legally complex, especially if the device is not yours or if you don’t have authorization to unlock it. To properly unlock the Mi Pad 4 from FRP, here are the steps you can follow if it’s your device:
Steps to bypass FRP on Mi Pad 4:
Ensure you have your Google Account details: FRP protection requires the Google account that was previously linked to the device, so be sure to have access to it.
Perform a factory reset:
- Power off the Mi Pad 4.
- Boot into Recovery Mode by holding down the Volume Up button and Power button simultaneously.
- Once in Recovery Mode, navigate to Wipe Data/Factory Reset and confirm.
Proceed with the setup: Once the factory reset is complete, the device will reboot and prompt you to sign in with the Google account that was previously associated with the device.
Use Mi Account to bypass (if applicable):
- On some Xiaomi devices, you might also be prompted to sign in with your Mi Account. If you are the owner of the account, enter your Mi Account credentials to proceed.
Contact Mi Support: If you can’t remember the Google account or Mi account credentials, you can reach out to Xiaomi Support for assistance.
Alternatives (in case you don’t have the credentials):
Unlocking tools: There are third-party tools that claim to bypass FRP, but these can be risky and may void your warranty or damage the device if not used correctly. It’s best to use these tools with caution and only from trusted sources.
Visit an authorized service center: If you’re unable to unlock the device on your own, the safest route is to visit a Xiaomi authorized service center or contact Xiaomi customer support.
Please ensure that you are following these steps legally and that the device belongs to you. Unauthorized unlocking or bypassing FRP without proper authorization is illegal in some regions.
If you’re looking for a more detailed guide on how to bypass FRP (Factory Reset Protection) on the Mi Pad 4 (Clover) or want additional steps, here’s a more extensive process you can follow:
Detailed Steps for FRP Bypass on Mi Pad 4 (Clover)
Pre-requisites:
- Google Account: You need access to the Google account that was previously used on the device. If you forgot your Google account credentials, you can try to recover them via the Google Account Recovery page.
- Mi Account: If the device was linked to a Mi Account, you will need the credentials for that account as well.
- USB OTG Cable and Mouse (if needed): Some methods involve using a USB OTG cable to connect a mouse, allowing you to navigate through menus.
Method 1: Using the Mi Account (If you remember the Mi Account credentials)
Perform a Factory Reset:
- Turn off the device.
- Boot into Recovery Mode by holding the Volume Up button and the Power button at the same time.
- Once in Recovery, navigate using the volume buttons and select Wipe Data or Factory Reset. Confirm the reset.
- After the reset, the device will reboot.
Mi Account Verification Screen:
- Once the device restarts, you will be asked to sign in with the Mi Account associated with the device.
- If you know the credentials, enter them to unlock the device.
Method 2: Using Google Account (If you remember the Google account)
Perform a Factory Reset (same as above).
Sign in with Google Account:
- After the device reboots, during the initial setup, you will be prompted to log in with the Google account that was previously associated with the device.
- Enter the correct Google Account credentials and proceed. Once logged in, the FRP lock will be removed, and you can continue with the device setup.
Method 3: Using an OTG Cable and APK Installation
In some cases, if you cannot access your Mi Account or Google account directly, you can use an OTG cable to install an APK that can help bypass the FRP lock.
Step-by-Step Guide:
Perform a Factory Reset (same as above).
Use an OTG Cable and a Mouse:
- Connect a USB OTG cable and attach a mouse to the Mi Pad 4.
- This will allow you to navigate the device with the mouse pointer.
Download an APK:
- You’ll need to download an APK that helps bypass the FRP. There are several tools available online, such as the FRP bypass APK, Quick Shortcut Maker, or others.
- Transfer the APK to a USB flash drive or SD card, and use the OTG cable to access the files.
Install the APK:
- Open the file manager on the device and locate the APK file on the USB or SD card.
- Install the APK to access the device’s settings and remove the FRP lock.
Proceed to Complete Setup:
- Once installed, you can follow the on-screen instructions to remove the FRP lock.
Method 4: Using a Specialized FRP Bypass Tool
There are tools like Mi Flash Tool or Test Point Method (advanced) that some people use to unlock FRP, but these methods are riskier and require technical knowledge.
Test Point Method (Advanced):
- This method involves using a test point on the device’s motherboard, which allows you to access the bootloader and bypass the FRP.
- This method requires soldering and can void your warranty. It’s best used by experienced technicians.
Mi Flash Tool:
- If the device is in Fastboot mode and you can access the bootloader, you might use tools like Mi Flash Tool to flash the device with an official Xiaomi firmware.
- Unlocking the bootloader may be required for this process. The procedure may involve wiping data and re-flashing the stock firmware.
Method 5: Contact Xiaomi Support
If you’re unable to bypass the FRP lock using any of the methods above, contacting Xiaomi support or visiting an authorized Xiaomi service center is the safest route.
- Provide proof of ownership (like a receipt) to verify the device is yours. Xiaomi support can then assist with unlocking the FRP lock.
- Keep in mind that Xiaomi may require you to provide additional information or documentation to verify your ownership.
Important Considerations:
- Security Risks: Some FRP bypass methods, especially third-party tools, carry inherent risks such as malware or damage to your device. Always be cautious and avoid untrusted sources.
- Legal Concerns: Always ensure that the device is legally yours and that you have the proper authorization to unlock it. In some regions, bypassing FRP without proper permission can be illegal.
Flash Tools;
New mtk+qualcomm drivers: Download
Sp flash Mtk latest tool GsmXr.com Download
XiaoMi Flash Qualcomm tool by GsmXr.com Download
File Name: Mi Pad 4 ( clover ) Mi Account frp
File Size: small
Mi Pad 4 ( clover ) Mi Account FRP GsmXR.com Download
MORE> All Model Mi Account FRP File: Download
Contact Admin For Any Issue
Whatsapp :- +91 9289915006
Telegram :- t.me/gsmxr_admin
Online Flashing Unlocking Available Contact ME
Support Waya Teamviwer Direct Click Whatsapp/+91 9289915006
Final Thoughts:
Bypassing FRP on the Mi Pad 4 (Clover) can be a challenging process if you don’t have access to the Google or Mi account credentials. The safest and most secure method is to use the Mi Account or Google Account recovery options. If that’s not possible, professional assistance from Xiaomi support is the best option.
Let me know if you need further clarification or assistance with any of the steps!
