Poco C3 MTK (angelicain) Mi Account FRP Small File

If you’re looking to remove the FRP (Factory Reset Protection) lock on a Poco C3 (with MediaTek chipset) associated with a Mi Account, you will need to follow a set of procedures carefully. Please be aware that bypassing FRP without the necessary credentials can lead to data loss or bricking the device. Ensure that you’re legally authorized to unlock the device.

Steps to remove Mi Account FRP on Poco C3 (MTK):

1. Verify Account Credentials: Ensure you have the Mi Account credentials (email/phone and password) associated with the device. If you don’t have access to the Mi Account, you can attempt to recover the account through Xiaomi’s official website (https://account.xiaomi.com).
2. Factory Reset (Optional):
   • If you have access to the device settings, perform a factory reset by going to:
     • Settings > About phone > Factory reset.
   • This will trigger the FRP, but if you do not have the Mi Account credentials, you’ll be locked out.
3. Access Recovery Mode:
   • Power off the phone.
   • Press and hold Volume Up + Power buttons simultaneously to enter Fastboot mode or Recovery mode.
   • You may need to unlock the bootloader if it’s locked (this requires the Mi Account credentials).
4. Unlock the Bootloader (if necessary):
   • Visit Xiaomi’s official website (https://en.miui.com/unlock/) and apply for bootloader unlocking permissions.
   • Once approved, unlock the bootloader using Mi Unlock Tool.
5. Remove Mi Account via Mi Flash Tool (if the device is in Fastboot Mode):
   • Download and install the Mi Flash Tool on your computer.
   • Put your device in Fastboot Mode (Volume Down + Power button).
   • Connect your Poco C3 to your PC using a USB cable.
   • Use the Mi Flash Tool to flash a stock ROM on the device. This can sometimes remove the Mi Account FRP lock.
6. Use Third-Party Tools: If the above steps are not successful, there are third-party tools like SP Flash Tool, MiTool, or MIFR (Mi FRP Removal Tool) that might help. However, be cautious about the tools you use and their sources, as some may be unreliable or require advanced technical knowledge.
   • Download and install the tool that suits your need.
   • Follow the on-screen instructions to bypass FRP, but ensure that you follow a tutorial specific to the Poco C3 to avoid errors.
7. Contact Xiaomi Support: If you are unable to unlock the FRP or Mi Account, consider contacting Xiaomi Support for assistance. You may be asked to provide proof of ownership before they can help you remove the lock.To expand on the FRP (Factory Reset Protection) removal process on the Poco C3 (with MediaTek chipset), here’s a more detailed guide on what you can try, including additional methods and tools.
   

   Detailed Steps to Remove Mi Account FRP Lock on Poco C3 (MTK)

   1. Ensure You Have Mi Account Credentials
      • The Mi Account associated with the device is essential for unlocking the FRP lock. If you don’t have access to the Mi Account, try account recovery:
        • Visit the official Mi Account Recovery page: https://account.xiaomi.com.
        • You can reset the password if you have access to the recovery email or phone number.
   2. Perform Factory Reset (If Possible)
      • Sometimes, if you’re still able to access the phone’s settings before the FRP kicks in, perform a factory reset:
        • Settings > About phone > Reset.
        • After performing a reset, the FRP protection will activate.
      • Note: If the FRP protection was triggered, you will need the Mi Account credentials to proceed further.
   3. Enter Recovery Mode or Fastboot Mode If you’ve already performed a factory reset and are now facing the FRP lock on the device:
      • Turn off the device.
      • Press and hold Volume Up + Power buttons at the same time until the Mi Logo appears.
      • This will bring you into the Recovery Mode.
      • Alternatively, you may enter Fastboot Mode (Volume Down + Power button) if you want to use specific tools to unlock or flash the ROM.
   4. Unlock the Bootloader (If Required)
      • If the bootloader is locked, you will need to unlock it to perform further operations such as flashing the firmware:
        • Request Bootloader Unlock Permission from the official Xiaomi website: https://en.miui.com/unlock/.
        • Once your unlock request is approved, you will be able to unlock the bootloader using Mi Unlock Tool:
          • Download Mi Unlock Tool from the official Xiaomi page.
          • Follow the tool’s instructions for unlocking the bootloader. You will need to sign in with the same Mi Account associated with the device.
        • Important: Unlocking the bootloader will erase all data on the device.
   5. Use Mi Flash Tool to Flash Stock ROM
      • After unlocking the bootloader, the Mi Flash Tool can help in flashing a stock MIUI ROM. This can sometimes bypass the FRP lock.
        • Download the Mi Flash Tool: Available on the official Xiaomi website.
        • Download the correct ROM for your device (Poco C3). Be sure to match the correct region and device model.
        • Steps:
          1. Install the Mi Flash Tool on your computer.
          2. Place your phone in Fastboot Mode (Volume Down + Power button).
          3. Connect the phone to your PC.
          4. Launch the Mi Flash Tool, select the downloaded ROM, and hit Flash.
      • This process may wipe the device clean, but it should remove the Mi Account FRP lock if done correctly.
   6. Third-Party FRP Bypass Tools There are several third-party tools that can help with removing the Mi Account FRP lock. However, proceed with caution as these tools may not be as reliable, and could risk damaging your device if not used properly:Some popular tools include:
      • SP Flash Tool: Often used for flashing firmware or removing FRP on MediaTek devices.
        • SP Flash Tool allows you to flash MTK firmware and sometimes bypass FRP locks.
        • Download the tool and use an appropriate firmware for your device model.
      • MiFRP Tool: This is specifically designed for bypassing Mi Account FRP.
        • You can download the MiFRP Tool from trusted sources. However, ensure that the source is reliable to avoid downloading malicious software.
      • MRT Tool: This is another tool that supports unlocking devices, including removing Mi Account locks on some Xiaomi devices.
   7. Use ADB Commands (Advanced) If you have the Android Debug Bridge (ADB) enabled on the device before it was locked (and you can still access the device in Recovery or Fastboot Mode), you can use ADB commands to remove the Mi Account FRP lock.Here’s a step-by-step guide:
      • Install ADB on your computer: Download ADB from the official Android developer site.
      • Enable USB Debugging on the device: (This will only work if USB Debugging was enabled before the device was locked).
      • Connect the device to the computer.
      • Launch ADB command prompt and run the following commands:

        adb devices
        adb shell am broadcast -a android.intent.action.MAIN -c android.intent.category.HOME
        

        • This can sometimes bypass certain FRP locks, but it might not work on all devices.
   8. Contact Xiaomi Support If all the above methods fail, you can reach out to Xiaomi Support for assistance:
      • You may be required to provide proof of ownership, like the original purchase receipt.
      • They may offer you a solution to remove the Mi Account FRP lock from your device.

      Xiaomi Customer Support Page: https://www.mi.com/global/service/

   Important Considerations:

   • Backup Data: If you successfully unlock the device, it’s a good idea to back up your data regularly. Flashing or factory resetting a device can result in data loss.
   • Legal Implications: Only attempt to unlock a device if it belongs to you or you have authorization. Unauthorized unlocking could be illegal in some jurisdictions.
   • Security Risks: Using unverified third-party tools or flashing firmware from unofficial sources can expose your device to security risks and cause permanent damage.

   Summary:

   • Mi Account Credentials are required to bypass the FRP.
   • Perform a factory reset if you can.
   • Unlock the bootloader if necessary and use Mi Flash Tool to flash the official MIUI ROM.
   • For more advanced methods, you may need to use SP Flash Tool, MiFRP, or other third-party tools, but proceed with caution.
   • If unsuccessful, contact Xiaomi support.

   Feel free to ask if you need more details or specific assistance!

Important Notes:

• Data Loss: Be aware that unlocking and flashing your device can result in data loss.
• Legal Considerations: Always ensure you are authorized to unlock the device. Bypassing FRP on devices you do not own or have not been authorized to modify is illegal in many countries.
• Security: Be cautious when using third-party FRP bypass tools. Some of them might be malicious or unreliable.

Let me know if you need help with any of the steps or further clarification!
==================

Flash Tools;

New mtk+qualcomm drivers: Download 

Sp flash Mtk latest tool GsmXr.com Download

XiaoMi Flash Qualcomm tool by GsmXr.com Download

File Name: Poco C3 MTK (angelicain) Mi Account frp

File Size: small

Poco C3 MTK (angelicain) Mi Account FRP data GsmXR.com Download

MORE> All Model Mi Account FRP File: Download

Online Flashing Unlocking Available Contact ME Support Waya Teamviwer Direct Click Whatsapp/+91 9289915006