Poco M2 ( shiva ) Mi Account FRP small file

To provide you with more detailed guidance for removing the Mi Account FRP lock on your Poco M2 (MTK variant, also known as “Shiva”), I’ll break down some methods you can follow, including more technical solutions.

Step-by-Step Methods for Mi Account FRP Removal on Poco M2 (Shiva)

Method 1: Mi Account Recovery

1. Go to Mi Account Website:
   • Open a browser on your computer or mobile device.
   • Visit the official Mi Account recovery page: Mi Account Recovery.
2. Choose Your Recovery Option:
   • If you’ve forgotten your Mi Account password, enter the email or phone number linked to the account.
   • Follow the prompts for SMS recovery or email verification.
3. Enter the Code:
   • Once you receive the verification code via email or SMS, enter it into the Mi Account recovery form.
4. Reset Your Password:
   • After successfully verifying your identity, you’ll be able to reset your Mi Account password and regain access.

Method 2: Unlocking via Mi Flash Tool (For Advanced Users)

If the Mi Account recovery option doesn’t work or isn’t viable, the next best solution is flashing the device back to its factory state via Mi Flash Tool. This is a more complex method and involves wiping the device, so make sure you have backed up any important data.

1. Download Mi Flash Tool:
   • Download and install the Mi Flash Tool from an official Xiaomi source.
2. Download the Correct Firmware:
   • Download the official firmware for your Poco M2 (Shiva). Make sure you choose the correct region and version of the firmware.
   • You can find the firmware on the Xiaomi forum or trusted sites like Xiaomi.eu.
3. Enter Fastboot Mode:
   • Power off the device.
   • Hold the Volume Down button + Power button simultaneously to boot into Fastboot mode.
4. Connect the Device to Your PC:
   • Connect your Poco M2 to your computer using a USB cable.
   • Open Mi Flash Tool and select the path where you downloaded the firmware.
5. Flash the Device:
   • In Mi Flash Tool, click on Refresh to detect your device.
   • Choose the “Clean All” option to erase all data and reset the device to its factory settings.
   • Click on Flash to begin the flashing process.
6. Wait for Flashing to Complete:
   • The flashing process will take several minutes. After it’s complete, the device should restart and the Mi Account FRP lock may be removed.

Method 3: Using SP Flash Tool (For MTK-based Devices)

If you’re using a MediaTek (MTK) version of the Poco M2 (“Shiva”), you can try using the SP Flash Tool to perform a full firmware flash and possibly bypass the Mi Account lock.

1. Download SP Flash Tool:
   • Download the SP Flash Tool from a reliable source like the official forum or trusted developer communities.
2. Install MediaTek USB Drivers:
   • You’ll need to install the correct MediaTek USB drivers to allow your computer to communicate with the phone.
3. Download the MTK Firmware for Poco M2:
   • Look for the MTK firmware that matches the exact model and version of your Poco M2.
4. Enter EDL (Emergency Download) Mode:
   • Turn off the device.
   • Press and hold the Volume Down button and connect the device to the PC using a USB cable.
   • The phone should enter EDL Mode (Emergency Download Mode), which will allow SP Flash Tool to work.
5. Use SP Flash Tool to Flash Firmware:
   • Open SP Flash Tool and select the firmware files you downloaded.
   • Click on Download to start the flashing process.
6. Wait for Flashing to Complete:
   • Wait for the process to finish. Once it’s done, your device should be reset to factory settings and should no longer be locked to the Mi Account.

Method 4: Using Third-Party Tools (For FRP Removal)

There are third-party software tools that are often used to bypass FRP (Factory Reset Protection) and Mi Account locks on Android devices. However, keep in mind that using these tools can be risky, as they may lead to device instability or even permanent damage if not used properly.

Some of the popular tools for bypassing FRP and Mi Account locks include:

• MRT Dongle: An advanced tool that supports FRP and Mi Account bypass for a variety of MTK and Qualcomm-based devices.
• Miracle Box: Another professional tool used to remove locks and bypass FRP on Android devices.

These tools often require purchasing a license and using specialized cables or box interfaces to communicate with your phone.

Method 5: Unlock via ADB Commands (If USB Debugging Is Enabled)

If USB Debugging was enabled on the device before the factory reset, you can use ADB (Android Debug Bridge) commands to potentially unlock or bypass the Mi Account. This method is highly dependent on whether ADB was previously configured on the phone.

1. Install ADB on Your Computer:
   • Install ADB drivers and tools on your computer by following guides available online for your operating system.
2. Connect the Phone to Your PC:
   • Connect your Poco M2 to your computer using a USB cable.
3. Run ADB Commands:
   • Open a Command Prompt window (on Windows) or Terminal (on macOS/Linux).
   • Type adb devices to check if your phone is detected.
   • If detected, use specific ADB commands to try unlocking the phone or bypassing the Mi Account.

   Example ADB command:

   adb shell am broadcast -a android.intent.action.MAIN -c android.intent.category.HOME
   

   This command may help bypass certain locks by bringing up the home screen, but results can vary.

   ---

   Flash Tools;

   New mtk+qualcomm drivers: Download 

   Sp flash Mtk latest tool GsmXr.com Download

   XiaoMi Flash Qualcomm tool by GsmXr.com Download

   File Name: Poco M2 ( shiva ) Mi Account frp

   File Size: small

   Poco M2 ( shiva ) Mi Account FRP GsmXR.com Download

   MORE> All Model Mi Account FRP File: Download

   
   Online Flashing Unlocking Available Contact ME Support Waya Teamviwer Direct Click Whatsapp/+91 9289915006

    

Important Considerations:

• Legal Disclaimer: Bypassing Mi Account locks and FRP without proper authorization may violate Xiaomi’s terms of service and may be illegal in some jurisdictions. Always ensure that you own the device or have legal permission to unlock it.
• Data Loss: Flashing the firmware or performing resets will erase all data on your device. Always back up important data before proceeding.
• Warranty: Some methods, especially those involving third-party tools or flashing, may void the warranty of your device.

If you’re uncomfortable with any of these steps, or if you’re not sure how to proceed, it may be best to visit an authorized Xiaomi service center or seek help from a professional technician.