xiaomi 11i Hypercharge Pissarro MTk Mi Account Remove File Free with frp file include no download file open any tool inter manual address
Requirements:
- MI Flash Tool: Download the latest MI Flash Tool from the official Xiaomi website or trusted sources.
- Xiaomi USB Drivers: Make sure to install the official drivers for your Xiaomi device to ensure proper connectivity between your PC and phone.
- Stock ROM (Firmware): Download the correct official stock firmware (ROM) for your Xiaomi device.
- A Xiaomi Phone in Fastboot Mode: The device should be in Fastboot mode to use MI Flash Tool.
Steps to Flash MI Flash Tool:
1. Prepare Your PC:
- Install MI Flash Tool on your computer.
- Download and install the Xiaomi USB drivers.
- Download the official Xiaomi stock firmware (usually a
.tgzor.zipfile). - Extract the stock firmware to a folder on your computer.
2. Put Your Phone in Fastboot Mode:
- Power off your Xiaomi device.
- Press and hold Volume Down + Power buttons simultaneously until you enter Fastboot mode (the screen should display the “Fastboot” logo).
3. Connect Your Phone to the PC:
- Use a USB cable to connect your phone to the PC.
- You may see a “Fastboot” message on the screen of your phone.
4. Open MI Flash Tool:
- Run MI Flash Tool as administrator on your PC.
- In MI Flash Tool, click on the “Select” button and navigate to the folder where you extracted the firmware.
5. Select the Firmware:
- After extracting the firmware, make sure you select the folder containing the ROM (not the individual files inside). MI Flash Tool will automatically detect the necessary files.
6. Choose Flashing Options:
- You’ll have a few options:
- Clean all: Wipes all data, including internal storage.
- Save User Data: Keeps your personal data (like apps, messages, etc.) but still flashes the ROM.
- Flash all: Flashes the full stock ROM (including system, boot, recovery, etc.) and wipes everything. Select the one that fits your needs.
7. Start Flashing:
- Once everything is set, click the Flash button.
- The tool will begin flashing your Xiaomi device. The process might take a few minutes.
- Once finished, you should see a Success message.
8. Reboot Your Device:
- After the process completes, your device will either automatically reboot or you may need to manually reboot it.
- If your phone is stuck in Fastboot mode, you can use the command
fastboot rebootto reboot the phone.
Troubleshooting:
- If the flashing process fails, try using a different USB cable or USB port.
- Ensure that you have the correct firmware version for your device.
- Ensure that the Xiaomi USB drivers are installed properly.
Once the process is complete, your device should be back to its stock firmware! Let me know if you run into any issues during the process.
Driver Install First
New mtk+qualcomm drivers: Download
Sp flash Mtk latest tool GsmXr.com Download
XiaoMi Flash Qualcomm tool by GsmXr.com Download
File Xiaomi 11i Hypercharge ( Pissarro ) Mi Account FRP free File.
File Size: Small Tool V5
Password> free
Tested file 100% working mi acount frp
Xiaomi 11i Hypercharge ( Pissarro ) Mi Account FRP_GsmXR.com: Download DRIVE LINK
Sp flash Mtk latest tool GsmXr.com Download
MORE> All Model Mi Account FRP File: Download
