The Poco X3 PRO (vayu/bhima) is a strong performance device, but many users face dead device / hard brick issues after flashing wrong ROM, custom ROM, or unlocking bootloader. In most cases, the phone shows Qualcomm HS-USB QDLoader 9008 Mode or no screen response (black / dead).
Here is the 100% working tested Dead Fix File to Unbrick and revive Poco X3 Pro easily. This file has been tested on MIUI, HyperOS, Custom ROM & Stock Boot issues.
What this Dead Fix File Solves?
Issue
Status
Black screen / No Display
✅ Fixed
Only Qualcomm 9008 Mode
✅ Fixed
Bootloop on POCO Logo
✅ Fixed
Fastboot stuck
✅ Fixed
Soft / Hard Bricked Device
✅ Fixed
Rebooting Again & Again
✅ Fixed
Download Poco X3 PRO Dead Fix Files
Model Supported: Vayu + Bhima Chipset: Qualcomm SD 860 Tested: Yes ✅ Status: Fully Working 🔥 Password: gsmxr
Test Point Pin short method (if device not detected)
How to Flash Poco X3 Pro Dead Fix File (Step-by-Step)
Power off the device completely.
Open the back panel and locate Test Points.
Short the Test Point and connect USB cable.
PC will detect device as Qualcomm HS-USB QDLoader 9008.
Open QFIL Tool → Select Flat Build.
Load the following:
prog_firehose.mbn
rawprogram.xml
patch0.xml
Click Download / Flash.
Wait 100% completed and device will reboot automatically.
Done ✅ Your phone is now alive.
Important Notes (Read Before Flashing)
This process does not remove IMEI.
Use good USB cable & working USB port.
Do not unplug phone while flashing.
Battery should have some charge (if possible).
Conclusion
If your Poco X3 PRO is dead, not turning on, or stuck in Qualcomm 9008 Mode, then this Dead Fix File will help you unbrick your phone easily. This solution is fully tested and completely safe.
